Free Shipping for all orders. Enjoy ! Hurry up!

Marvell 88SE9215 chip 6 ports SATA 3.0 to PCIe expansion Card PCI express SATA Adapter SATA 3 Converter with Heat Sink for HDD (Black)

Add to wishlistAdded to wishlistRemoved from wishlist 0
Add to compare

Brand Name: h1111z
Type: M.2 SSD To PCI-E
Interface Type: PCI Express
Interface Type: Other
Package: Yes
Model Number: KZ5166
Feature 1: pci express sata 3 card
Feature 2: pcie to 6-port sata 3.0 card
Feature 3: 6 port sata card
Feature 4: pcie sata card
Feature 5: pci e sata
Feature 6: pci-e sata card
Feature 7: pci express x1 sata card
Feature 8: for computer pc hard disk
Feature 9: sata 3 controller
Feature 10: pcie to sata card

$32.13

603 in stock

SKU: 33016481933 Category: Tags: , , , , , , , , , , , , , , , , , , , ,

aeProduct.getSubject()

 

 

Marvell 88SE9215 chip 6 ports SATA 3.0 to PCIe expansion Card PCI express SATA Adapter SATA 3 Converter with Heat Sink for HDD  


 

 

About Description:

 

Features:
Compliant with Serial ATA 3.0 specification, backward compatible with SATA2.0 SATA1.0
 
Compliant with PCI-Express v2.0 specification, backward compatible with PCI-Express v1.0.
 
Supports communication speeds of 6.0 Gbps, 3.0 Gbps and 1.5 Gbps
 
Support Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x, and Gen 3i.
 
Support 6 SATA
 
Support AHCI1.0 mode and IDE mode
 
Support for native command queue (NCQ)
 
Support FIS based on port multiplier switch or command switching.
Support hot swap and hot swap.
 
Compatible with SATA6G, 3G and 1.5G hard drives
 
Bus interface: PCI-Express x1 slot
 
Expansion interface: 6 SATA3.0 interfaces
 
System Requirements: One PCI Express X1 slot is available, supporting both PCI-E X2 X4 X8 X16
 
Operating system: Windows10/8/7 (32/64 bit) / Vista (32/64 bit) / XP/2003/2008/linux
 
 
Product driver file:
 
1. CD: … DRIVERSATA CARDMarvell91XX_92XX Setup, then select the appropriate folder according to the system.
 
The PCIE to SATA3.0 riser card is used as follows:
 
First, the system disk and PCIE to SATA3.0 riser card connection conditions and solutions:
 
1. The SATA interface mode of PCIE to SATA3.0 is AHCI mode. If you want to plug in the system disk on our card, the premise is that your system disk must be installed in AHCI mode when installing the system on the motherboard. Otherwise, it will not pass. Our card riser card starts the system.
 
2. If it is determined that the SATA interface installation system of the system disk inserted in the motherboard is AHCI mode, then you can directly insert the hard disk into our card, and then enter the motherboard BIOS to set the system disk as the first boot.
 
3, the above two conditions are available, if it still can not start, or repeated reboots, then the motherboard’s hard disk interface and our adapter card conflict, the solution is to enter the motherboard BIOS, set the motherboard’s hard disk interface options to Disabled, save and restart to start the system
 
 
Second, the common disk and PCIE to SATA3.0 connection conditions and solutions:
 
1. When the system disk is plugged into the motherboard, the ordinary disk is inserted in the PCIE to SATA3.0 card, then only the adapter card information and the ordinary disk model need to be detected at startup.
 
2, if the condition is established, or can not start the system, then you must enter the motherboard BIOS, set the system disk to the first boot.
 
Third, the system disk and the ordinary disk and PCIE to SATA3.0 connection and solution:
 
1. Prerequisites, if the system disk with the original motherboard installed system is AHCI mode test, can use the following methods to achieve, if it is IDE mode installed system, then you can only reinstall the system through PCIE to SATA3.0 .
 
2, 1 condition is established, you can not start to enter the motherboard BIOS, set the system disk to the first boot.
 
3, 1.2 conditions are met, or can not start, then it may be integrated SATA interface conflict, please enter the motherboard BIOS to set SATA to Disabled

 

 
You’ll receive:

1 x SATA III (6Gbps) 6-port PCI-Express Controller Card
1 x CD Driver
1 x Low Profile Bracket

  • Please check pictures for more details.

Specification: Marvell 88SE9215 chip 6 ports SATA 3.0 to PCIe expansion Card PCI express SATA Adapter SATA 3 Converter with Heat Sink for HDD (Black)

Weight 0.12 kg
Dimensions 15.0 × 10.0 × 6.0 cm
Color

Black

Feature 1

pci express sata 3 card

Feature 3

6 port sata card

Feature 2

pcie to 6-port sata 3.0 card

Feature 5

pci e sata

Feature 4

pcie sata card

Model Number

KZ5166

Feature 7

pci express x1 sata card

Feature 6

pci-e sata card

Feature 9

sata 3 controller

Feature 8

for computer pc hard disk

Brand Name

h1111z

Type

M.2 SSD To PCI-E

Package

Yes

Feature 10

pcie to sata card

Interface Type

Other

User Reviews

0.0 out of 5
0
0
0
0
0
Write a review

There are no reviews yet.

Be the first to review “Marvell 88SE9215 chip 6 ports SATA 3.0 to PCIe expansion Card PCI express SATA Adapter SATA 3 Converter with Heat Sink for HDD (Black)”

Your email address will not be published. Required fields are marked *

Logo
Reset Password
Compare items
  • Total (0)
Compare
0