Free Shipping for all orders. Enjoy ! Hurry up!

PCIE SATA III 8 Ports Controller Card PCIe 2.0 x1 SATA 6G Expansion Card with Low Profile Bracket Support Win10 PCIE SATA Card

Add to wishlistAdded to wishlistRemoved from wishlist 0
Add to compare

Brand Name: QINDIAN
Interface Type: PCI Express
Interface Type: SATA
Package: Yes
Model Number: AC4480
Main Chips: 8 port sata card
Bus Type: PCI Express X1
Feature: with large heatsink cooling
SATA1: controller sata 3
SATA2: pci-e sata
SATA3: pcie sata
SATA4: sata controller
SATA5: sata
SATA6: sata3 pcie
SATA7: sata card
SATA8: pci express sata
SATA9: sata 3 pcie
SATA10: sata expansion
SATA11: pcie sata 3
SATA12: sata multiplier
SATA13: sata pcie
SATA14: sata pci-e
SATA15: sata 3
SATA16: pci express sata 3
SATA17: pcie to sata
SATA18: pcie to sata 3.0 card
SATA19: sata add on card
SATA20: sata 3 pci express
SATA21: pcie sata card
SATA22: sata3 pci-e


986 in stock

SKU: 4000346249399 Category: Tags: , , , , , , , , , , , , , ,



PCIE SATA III 8 Ports Controller Card PCIe 2.0 x1 SATA 6G Expansion Card with Low Profile Bracket Support Win10 PCIE SATA Card     



About Description:


Marvell 88SE9215 chipset
Ports: 8 SATA 6GB/s Ports
Compliant with PCI-E Specification V2.0 and backward compatible with PCI-E 1.X
Supports Native Command Queuing (NCQ)
Compatible with SATA 6G, 3G and 1.5G Hard drives
Compliant with PCI-E Specification v2.0 and backward compatible with PCI-E v1.x
PCI Express x1 Interface, and Compatible with PCI Express x1, x2, x4, x8 and x16 Slots
Marvell 88SE9215+JMicron JMB5xx chipset
Supports 10TB hard disk drives
Non-RAID standard SATA controller


Special features

System Requirements:Windows 10/8.1/8/7(32/64bit)/XP/Linux

 Interface:PCI Express x1 interface. Compatible with PCI-E X1,X4,X8,X16 Slots

Installation instructions

 1:Please clean the gold finger of SATA3.0 card by eraser , Plug the SATA cable of the chassis into the card.       

then connect all the hard disks.

 2:Turn off the power of the computer and open the back cover of the PC; Remove the bars corresponding to the free slot on the chassis.

 3:Insert the expansion card into the corresponding PCI-E expansion slot of the host

 4:Secure the iron strip of the expansion card to the chassis with a screwdriver.

 5:Close the chassis and plug in the power cord to boot. After entering the system, install the driver

Driver Installation <For Windows XP/Vista/7/8/10(32/64 bit)>

 1. Insert the companion drive CD into the CD drive;

 2. Open “My Computer”, find the location of the disc, open the disc;

 3. Locate the “CD: SATA CARDMarvell9215drvsetup inside the .exe driver file;

 4. Then follow the instructions of the computer to complete the installation, then restart the computer

Check the installation

 Suitable for PCI-E card with Marvell 88SE9215+JMicron JMB5xx Chipset:

 Open the “Device Manager”, expand the “Universal Serial Bus Controller” option, if there is “Marvell 92xx SATA 6G Controller”, the hardware and driver are installed successfully; if there is “unknown device” or other information, the hardware or The driver did not install successfully.

 If there is “Standard SATA AHCI Controller” hardware information under “Device Manager” or

 “IDE ATA/ATAPI Controller”, that means the driver didn’t installed under windows10.
Card layout

The illustration below shows the major components of the SATA3.0 8 PORT expansion card.



l The SATA3.0 PCI-E card must be installed in the PCI-E slot of the motherboard, and can not be inserted into the PCI slot.

l The fastest speed is 380-450m/s in PCI-E 2.0 . If it is plugged into PCI-E1.0, the speed only runs 200-300m/s. Different computer configurations and sata ssd have different speeds. If all ports are used at the same time, the speed will slow down.

l We recommend to use this SATA 3.0 Card in PCIE2.0 or 3.0 slot, so as to get the fastest speed.

l SATA Port Multiplier is not supported if the driver is not installed.

l We must install the driver to recognize all the hard disks.

l Be sure to turn off the power of the computer before inserting or removing the card, and then insert the card to avoid damage to the motherboard or expansion card.

l If there is no CD-ROM or driver disc can not be read, you can contact retailer to send driver for you.


You’ll receive:

1 x SATA 3.0 Expansion Card
1 x Low Profile Bracket
1 x Driver CD

  • Please check pictures for more details.

Specification: PCIE SATA III 8 Ports Controller Card PCIe 2.0 x1 SATA 6G Expansion Card with Low Profile Bracket Support Win10 PCIE SATA Card

Weight 0.13 kg
Dimensions 23.0 × 20.0 × 8.0 cm

sata pcie


sata multiplier


sata 3


sata pci-e


pcie sata 3


sata expansion

Main Chips

8 port sata card


with large heatsink cooling

Interface Type



sata 3 pci express


controller sata 3


sata3 pci-e


pci-e sata


pcie sata card


pcie sata


sata controller




sata3 pcie

Model Number



sata card


pci express sata


sata 3 pcie

Brand Name


Bus Type

PCI Express X1




pcie to sata


pci express sata 3


sata add on card


pcie to sata 3.0 card

User Reviews

0.0 out of 5
Write a review

There are no reviews yet.

Be the first to review “PCIE SATA III 8 Ports Controller Card PCIe 2.0 x1 SATA 6G Expansion Card with Low Profile Bracket Support Win10 PCIE SATA Card”

Your email address will not be published. Required fields are marked *

Reset Password
Compare items
  • Total (0)