Free Shipping for all orders. Enjoy ! Hurry up!

trianglelab high quality Ender-3 or CR-10 3D printer Performance upgrade kit Double Gear Direct Drive BMG Extruder CR10 HOTEND

Add to wishlistAdded to wishlistRemoved from wishlist 0
Add to compare

Brand Name: DFORCE
Item Type: J-head
Model Number: ENDER3 cr10 KIT


If you need to send UPS/Fedex/TNT/DHL, please contact us. We need to discuss the freight with you.
The trianglelab has always been concerned about product quality. We are developing products and working hard to improve the quality. We will not abandon our reputation because of many cheap products on the market. It is believed that only high quality products can ensure the quality of your work and bring safety to your work.
Some of our products may be more expensive than others, but please believe in our quality and believe that you will not regret when you receive the goods.








Thank you very much for purchasing high quality accessories manufactured by trianglelab.Although our accessories are more expensive,we do not sell low-quality cheap products to our customers.Every customer is our good friend.We will treat every friend who trusts us sincerely.
Trianglelab Ender-3 / CR-10 3D Printer Upgrade Kit(Compatible with many similar models of 3D printers
*13:100k Hisens 3950 1% up to 300°C for hotend “Simple ONE ” & “Hotend “All In ONE”
#define TEMP_SENSOR_0 13

Recommended slicer setting:
retraction speed  over 80MM/S
retraction length 2.5-4MM
If you are facing PLA clogging problem,please try the followings:
1. Increase the retraction speed. The speed may have being  limited in the firmware try to change it. G-command “M203 E200”
2. Increase the extruder  acceleration.  check your firmware settings. G-command “M201 E9000”
3. Reduce the retraction depends on your machine setup.
4. Increase the nozzle temperature by 5-10 degrees.
5. Do not install the 2 screws for support the heatblcok like the stock hotend on the CR-10 printer.
6. Make sure that there is no gap between the heatsink and the heat breaker.

package list
Mini BMG Extruder                                         X 1
BLUE PTFE TUBE 1M                                       X 1
CR-10 HeatSink                                             X 1
CR-10 Titanium alloy heat break                      X 1
CR-10 Heater Block                                        X 1 (Silicone Socks Gift)
*Compatible 100K B3950 Thermistor OR 104GT-2 Thermistor  
*0.4MM Nozzle (Brass Nozzle)                         X1
The following is the full version of the option, please pay attention to choose the correct voltage.
Thermistor (NTC 100K B3950)                        X 1 (Only Set 1 and Set 2)
Heater Cartridge(12v or 24v)                          X 1  (Only Set 1 and Set 2
*We do not recommend installing the locking screw for the BLOCK. The screw will cause more heat to be transferred to the CR10 HeatSink, potentially affecting your cooling system.
Product description
*Please read the following list of explanations for each package carefully.
SET 1 12V Upgrade Kit
SET 2 24V  Upgrade Kit
SET 3 Simplify  Upgrade Kit
Upgrade kit installation demo:

High quality accessories detail presentation:


Specification: trianglelab high quality Ender-3 or CR-10 3D printer Performance upgrade kit Double Gear Direct Drive BMG Extruder CR10 HOTEND

Size 12V upgrade kit, 24V upgrade kit, simplify upgrade kit
Brand Name DFORCE
Item Type J-head
Model Number ENDER3 cr10 KIT
Weight 0.13 kg
Dimensions 12.0 × 12.0 × 6.0 cm

User Reviews

0.0 out of 5
Write a review

There are no reviews yet.

Be the first to review “trianglelab high quality Ender-3 or CR-10 3D printer Performance upgrade kit Double Gear Direct Drive BMG Extruder CR10 HOTEND”

Your email address will not be published. Required fields are marked *

Biggest Accessoires Shop - PreisGO
Reset Password
Compare items
  • Total (0)